新鋒玻璃絲網印刷機在印刷時工作時注意事項

    現在我國的絲網印刷技術不斷提高，絲印機也越來越智能化，由半自動逐漸向全自動買進，有效地節約了人力，這就為絲網印刷技術的不斷擴展提供可能。我們在使用新鋒玻璃絲網印刷機進行印刷時，有幾個需要注意的要點，希望大家能夠注意：

    1、絲網印刷時，油墨的控制

    油墨效果，會影響絲網印刷效果，油墨質量，會對印刷造成影響，在進行印刷時，需要控制出墨速度，新鋒玻璃絲網印刷機要保證墨能夠均勻，一旦上完墨之后，要讓墨干之后，才可以隨便移動。

    2、絲網印刷，印刷速率的控制

    絲網印刷速度如何，是可以認為控制的，對于全自動絲網印刷機而言，其可以自行設定，不需要太多人員操作，而對于非自動化絲網印刷機而言，其在絲印時，可能需要人來看管，印刷速度可能會慢一些。

    3、新鋒玻璃絲網印刷機印刷時，對印刷件的清潔

    絲網印刷機，印刷效果的好壞，除了和設備有關外，還和印刷件有關，印刷件如果有水，或者有臟污，都會引起上不上墨等情況，影響印刷，所以在印刷物品之前，要做好印刷件的清潔。操作使用絲網印刷機，需要專門的操作工，使用操作設備需要進行培訓，培訓合格后，才可以操作機械設備，操作人員要詳細了解各項注意事項，以及機械故障問題，以便出現故障時，能及時停機，保障機械設備被損壞。Now our screen printing technology continues to improve , more and more intelligent screen printing machine , semi-automatic to fully automatic gradually buy , effectively saving manpower , which is likely to continue to expand to provide screen printing technology. When we use screen printing machine for printing, there are a few points to note , I hope we can note :

    1, screen printing, ink control

    After the ink effect , it will affect the effect of screen printing , ink quality , will affect printing , during printing, the need to control the speed of the ink , the ink can to ensure uniform finish once the ink , let the ink dry before they can casually move .

    2 , screen printing , printing speed control

    How to speed screen printing , can be considered controlled , for automatic screen printing presses , its can set their own , without much personnel to operate , and for non- automatic screen printing presses , its when the screen , who may need to look at the tube , the printing speed may be slower.

    3 , printing , cleaning the printing member

    Screen printing , printing effect is good or bad , and equipment in addition to the outside, but also, and prints related to printing pieces if there is water or dirty , will cause the ink and so on does not affect printing , so printing items before printing pieces to do the cleaning . Operation using screen printing , the need for specialized operatives, using the operating device requires training , after training of qualified before they can operate machinery and equipment, the operator should learn more about the various considerations , as well as mechanical problems , so that failure, timely shutdown to protect machinery and equipment from being damaged.

    較新新鋒玻璃絲網印刷機資訊，請了解：http://sdlqxfyj.glass.com.cn/